www.boser.com.tw industrial power supply ac-dc ac-dc MPI-8080 80w ac-dc open frame power supply output 100w with fan required *input voltage: 85~264vac *input frequency: 47~63hz *input current: 3a at 115vac or 1.5a at 230vac max. capacitors *inrush current: does not exceed 30a at 115vac input or 60a at 230vac input, cold start at 25 o c *load regulation: with +5v output set between 4.95~5.05v and all output at 60% rated load, and all other outputs in the accuracy range, max. load can not > 80w convection cooling and > 100w forced air cooling *ripple and noise: peak to peak ripple and noise for each output is < 1% of each output voltage at rated load *line regulation: < +/-1% at rated load with +/-10% change in input voltage *load regulation: < +/-1% for +5v, < +/-5% for other outputs with +/-40% change in measured output loading from 60% rated load and other outputs at 60% rated laod *hold up time: > 16ms at 115vac input and rated load *efficiency: > 70% at nominal line and rated load *altitude: 10,000 feet *protection: short circuit: hiccup mode against short circuit or over load conditions auto recovery to normal after wrong conditions are removed output: built-in crowbar circuit shuts down outputs to avoid damage. trip point of over voltage protection is between 5.7~7.0v ac line on/off restarts and recovers the unit from over voltage protection *temperature: 0~+50 o c, requires forces air of 30cfm for outputs > 80w (operating); -20~+70 o c (storage) *humidity: 5~95%; non-condensing at 40 o c (operating) *dimensions: 15.24 x 8.38 x 3.8 cm within +/-0.4mm tolerance *mtbf: 283,179 hrs. features features safety standards safety standards *safety: ul 1950 / csa 22.2 no.234 / vde en60950 *emi: fcc class b / en55022 b *ems: level 3 of iec-801, 802, 803, 804 14.44 0.4 15.24 3.8 3.3 8.38 1.4 6.85 0.765 6.85 use #6-32 screw protrusion limits 2.5mm x4 2.5 screw system chassis measuring the screw protrusion first: transformer e n l 3.97 1 12 tb1 tb2 pin 1 2 3 input ac line-1 ac line-2 gnd output +5v gnd +12v -12v -5v pin 1~3 4~7 8~9 10 11 n/c 12 output voltage +5v +12v -12v -5v min. load 1a 0a 0a 0a rated load 6a 3.5a 0.5a 0.5a max. load 10a 6a 1a 1a tolerance +/-0.05v +/-0.75v +/-0.75v +/-0.25v
|